PowerColor RX 580 Red Devil 8Gb Ram SAMSUNG


#52

can this rom flash to samsung chipset ?
thank u


#53

Don’t think so. I haven’t changed the Samsung part of the straps.


#54

thank u
last i try rom from other member i get a lot memory error
Could it be from the wrongly edited rom ?


#55

Hi Ano, any update on the Powercolor RX580 8GB Red Devil OC Samsung Vbios?


#56

User at own risk. I don’t have a card with Samsung memory and could not test it.
Normally it should work but you never know. All BIOS flashes are risky!!! Anoraknophobias_PowerColor RX 580 Red Devil HYNIX_Samsung_powersave-1750.rom (256 KB)


#57

Hi there this is my VROM BIOS I use it run’s stable at 29.491 MH/s

With two Samsung and 4 HYNX I’ll gett 800W from Wall

RedDevil_RX580_8GB_SAMSUNG_1750_memshift_Powersave.rom (256 KB)

Here is HYNX https://anorak.tech/t/powercolor-rx580-red-devil-8gb-hynix/11180/107?u=devil

If you like my work you are allowed to donate

ETH: 0x34b8abe3399f25cf083489a5d1dbe9e545fc97d6
XMR: 43xdcqHjZiijHh233AwXJqibfx5qgtYvGKbgFRdTvKaNKrDS1T3dG3DVxfar6Sm5xSN76qBqP6Zwqj62xScFceD5J5NSHEY
BTC: 342Vh44wvpftV162Fm1uf5UMEmfC25AQVU


PowerColor RX580 Red Devil 8GB HYNIX
#58

If your having issues with your bios., check out Cryptolaboratory.co.uk for the most extreme GPU bios modifications!

23


#59

No need to pay for a bios.

PM me for free advice on any and all graphic cards.


#60

Drivers: 17.10.2 Compute Workmode

Claymore command options: -cvddc 850 -mvddc 850

No Afterburner changes.

RedDevilSamsungOptimized.rom (256 KB)


#61

Whats the msi afburner values?


#63

No afterburner Settings don’t change anything only fan value over 50% you can use it width Linux


#64

i tried your rom but got thousands of errors with it


#66

No errors in Claymore on Debian with these settings since 2 Months solomining -tstop 85 -tt 65 -fanmin 50 -fanmax 100 -mode 1


#67

Hi should now be more stable

PowerColorRedDevilSamsung8GB.rom (256 KB)

Here is HYNX https://anorak.tech/t/powercolor-rx580-red-devil-8gb-hynix/11180/111

If you like my work you are allowed to donate

ETH: 0x34b8abe3399f25cf083489a5d1dbe9e545fc97d6
XMR: 43xdcqHjZiijHh233AwXJqibfx5qgtYvGKbgFRdTvKaNKrDS1T3dG3DVxfar6Sm5xSN76qBqP6Zwqj62xScFceD5J5NSHEY
BTC: 342Vh44wvpftV162Fm1uf5UMEmfC25AQVU


#68

Hi to everyone sorry to bother but can anyone check my current mode by frosty i’m getting low hash rate in end NOV start DEC i get like 20-21 MH/S Stable (110 MH/s ETH stable ) and some times for little short period when the dag file attached is lower in numbers the hash rate get higher little 23-25 MH/s total in cards 136-145 MH/s


i attached the screen shots and the mod bios i;m using on my current rx580 red devil hynix 8gb

power color red devil rx 580 8gb hynix.rar (107.6 KB)


#70

Hey - Still new to this thread but here goes…

I also purchased 4 Red Devil RX 580

Any help on how to flash Bios would be great. I’ve download all the software but I am stuck…

How can I check if the ROM version (Samsung or Hynix ) ? Really dont want to mess up my card.
Thanks


#71

HI, i would recommend checking few Youtube videos on any other card just to get the idea and the experience >> you know to get the hang of it ))

then i would recommend just reading what you have without modding !

Heres what to do:
1.download GPU-Z install and read what card memory you got and the stock clock and all the other info .
2. download install AMD block chain drivers for AMD >> if you installed previous drivers uninstall them, then install the block chain drivers
3. Try mining and see what hashing power you get, then decide if you want to mod or not.

  1. IF YOU DECIDED on moding you need to download Polaris Bios Editor, i used v1.6.5 . (watch video on how to use it Youtube ) you will need to choice the card and then save the current stock bios of the card (ROM) just in case you want to restore to stock, and then you will download the new bios Rom from step 5 and write it to the card . (RECOMMENDATION CONNECT ONLY ONE CARD FIRST AND TRY IT THEN THE REST AFTER TESTING)

  2. I got hynix memo so i used what @Devil recommend and it worked great getting around 29-30 MH/s with less power and heat )) Here the link to his post Devil bios rom for the hynix memo

AND AGAIN READ WATCH FEW VIDEO FIRST BEFORE TESTING TO MODE ANY CARD AND ALWAYS MACK BACK UPS BEFORE WRITING NEW BIOS AND TRY ON ONE CARD FIRST !


#72

So i got a devil 580 8gb samsung today. im very disappointed in it so far… at stock it was ony getting 215hashs on cryptonight… than i found a setting in drivers called gpu workload and i put it on compute and it went right up too 700s…

But eilhash is still around 350hashs… I tried a few bios on here and it still wont go up… I just don’t get it…


#73

Make sure you installed the Block chain drivers and if your memo on the gpu is hynix you can try the above rom


#74

Works great thanks. Was ready to trash this Red Devil until I found your specs.